FIVE SWINE PRODUCTION FARROWING MANAGEMENT TIPS

0
31

FIVE SWINE PRODUCTION FARROWING MANAGEMENT TIPS

 

1. Implementing swine feeding strategies to encourage sow feed intake in the late evening and earlier morning hours

-Advertisement-

This will entice the sow to get up earlier and eat more of her ad-libitum feed during the cooler morning hours vs. hotter afternoon and evening feedings. Stimulating the sow early in the day will increase her total daily intake, and thus milk production to achieve heavier weaning weights and rebreeding success.

-Advertisement-

-Advertisement-
Learn More

A programmable swine feeding system or frequent human presence can entice a sow to get up automatically at set periods throughout the day and allow nursing bouts after the meal to give smaller piglets more opportunities to get milk from one of the front teats which tend to produce more milk.

 

As long as the sow is able to stand up at her own free will, preweaning mortality is not likely to be impacted (Leonard et al., 2020) reported that lactating sows typically stand about 120 minutes per day. A goal of precision feeding is to have her standing at multiple times per day vs. one longer standing bout.

READ ALSO: 5 Tips to Feeding Sows during Wean to Oestrus Period

2. Getting the right swine farrowing system and equipment

Strategy for a better swine production management: The heat pad and the Gestal Quattro together, help regulate the temperature of the creep area

Figure 2. The cable near the middle of the heat pad transmits the surface temperature to the Gestal Quattro. The actual reading is compared against a target temperature for that day of lactation.

 

Analyze inlet leaks, whether you have gravity or actuated inlets. Granted, we ideally want cooler air dropping on the sow, but absolutely must prevent cool air from dropping over the creep area (Eichen et al., 2008). This is more important since most USA producers don’t utilize horizontal hovers in the creep area.

 

The goal is to keep the sow at 68oF and the piglets around 86oF. In farrowing, ideally the heated zone should be uniform, rather than multi-temperate heat placement as in a wean-to-finish barn.

 

3. Avoiding to extra heat the sow

Heat mats have the inherent advantage of providing a rectangular area with bottom-up heat for the piglets, albeit through thermal conduction. The heat is away from the sow so she stays cooler, and the placement discourages the piglets from sleeping in the crush zone near the sow after they have nursed.

 

Heat lamps provide a circular heat pattern via radiative and convective heat transfer with the hotter zone near the center. If lamps are used, try to keep heat from lamps away from the sow zone.

 

4. Encouraging employees to dress up

Encourage employees to wear long-sleeve shirts to have the rooms be cooler for the sow. Running the room as “a hot nursery” should be avoided, not encouraged. Warm air holds more moisture which leads to increased respiratory stress, as well as unnecessarily increasing electricity costs. Granted, observation vs. a “one-size-fits-all” approach is best to prevent sow and piglet stress.

READ ALSO: Feed Particle Size and its Effect on Pig Gut Health

5. Getting sows on the farrowing feeding program earlier

Especially for batch systems, bringing the sows into the room several days before parturition has the advantage of getting them on an eating schedule for farrowing vs. their gestation schedule of one or possibly two meals per day on a limit-fed diet. Stage the heat lamp to turn on at a set period before she is due to farrow.

 join World Farmers Centre Whatsapp group to get and read  articles to help you Succeed in your farming business and relate with other farmers

We do everything possible to supply quality information for farmers day in, day out and we are committed to keep doing this. Your kind donation will help our continuous research efforts.

LEAVE A REPLY

Please enter your comment!
Please enter your name here